Sun. Jun 16th, 2019

TG1-AT 

Manual air texturing machine  (Video)

The manual SSM GIUDICI TG1-AT air texturing machine is designed for the cost efficient production of high quality air texturized yarns made of POY or FDY Polyester, Polyamide and Polypropylene and ranging from fine to medium final counts. The key features are:

  • Electric contact heater for the drawing of POY yarns at highest speeds, with low resulting shrinkage
  • Optimized components and contact surfaces for low breakage rates
  • Operator friendly machine profile and creel concept
  • SSM GIUDICI individual master godet
  • Sturdy machine design for low maintenance costs
Technical data TG1-AT
Type of winding random
Mechanical speed up to 800 m/min (1200 m/min at overfeed shafts)
(process speed depending on process parameters, texturing jet and supply yarn quality)
Package shape Cylindrical or bi-conical
Initial traverse length 195 or 245 mm
Take-up tube dimensions Length 229 or 289 mm, ID 69 mm, rolled nose ID 57 mm
Take-up package diameter up to 250 mm
Package weight up to 5 kg
Supply package 2 ends and stand-by per position:
– up to ∅ 450 mm, up to 250 mm tube length
Fibre material / Fibre structure PA, PP, PES, POY & FDY
Count range 50…600 den
Take-up levels 3
Layout / N° of positions min./max. Double sided / min. 24 / max. 288
Drive Split machine with individually controlled line shafts per side
Electrical power (basic power supply) 400 V, 50 cycles, 3 phases, loadable neutral, ground (adaptable to other power supplies)
Installed power – FDY version: 305 W per position
– POY version: 604 W per position
– Heat setting godet: 750 W per position
Compressed air requirement Compressor with air dryer, oil filter and air tank pressure at 7 bar for machine operation and at minimum 10 bar for process air
Process air consumption Depending on type of jet and air pressure, according to indication of jet manufacturer